The sLamp is ideal for outdoor street lighting. Its basis is technology and components from Japan and highly professional hand assembly in the Czech Republic.
Streets lit with the new sLamp are taken out of ingrained habits. The light from the sLamp is direct, without unnecessary glare for drivers and without side effects.
The sLamp has up to 60% lower consumption than regular street lighting. Today, reference orders are a clear indication of uncompromising and demonstrable savings during every minute of operation.
The sLamp has opened a new dimension of street lighting. Tomorrow’s light today.
Czech product
developed and produced in Czech Republic
Simple installation
into the existing lighting fixture
Long lifespan
usually 193 000 hours
Extremely low consumption
up to 60% less than a standard bulb
Wide operation temperature range
(Ta) -30 to +55 °C
Return and multiplication of investment
during the warranty period
7 year warranty
for luminosity decrease
Control options
DALI, 1-10V, sDimmer
No glare on the surrounding areas
the optics direct light only where it is needed
Saves eyesight
does not blink
Outdoor and indoor use
Compatability
sTube is designed for industry 4.0 systems
Different lens options
Variable light output for different types of communications
We recommend the sLamp for lighting all public spaces that require pure light and economical operation. Call us if you aren’t sure if the sLamp is suitable for your operations. We will be happy to hear from you.
At Snaggi we are ready to answer any questions you may have. Call us if you aren't sure about the properties of the sTube, or if you have any questions that haven't been answered. We will be happy to send a representative free of charge who will patiently offer you the best solution for your project. We will be happy to hear from you. Call us at 511 112 763 or 774 453 116. Show all contacts
Lamps are available as replacements for discharged public street lighting 70W, 120W, 250W, 400W. Specification .
Snaggi sLamp
A discharge lamp
Colour rendering index Ra is the fidelity evaluation of color perception, caused by light from any light source, compared to color perception created by the sun. The value of Ra can be from 0 to 100. Value Ra=0 means, that we can't distinguish colors in this lighting. On the other side value Ra=100 means, that we are using light source, which enables natural color reproduction.
Light output degradation and lifetime Comparsion of Snaggi LED sLamp, discharge and fluorescent lamps. (Average L70 Extrapolation)
Test report LM-80 according to TM-21 methodology / lifetime certification and degradation rate
The body of the sLamp is made of 1.3 mm sheet metal and 3mm and 5mm profiles from ČSN 11373 structural steel.
Anti-corrosion and surface coating is ensured by fired anti-corrosion epoxy powder resin with a high RIPOL PRIMER ZINC C290 zinc content and heat-cured polyester powder paint RIPOL PEA BIANCO with high resistance to sunlight and temperature and climate differences.
The customer can specify the colour of the body of the sLamp. The default colour is white RAL 9010.
| Name | sLamp 1/55 | sLamp 2/55 | sLamp 2/110 | sLamp 3/135 |
|---|---|---|---|---|
| Replaces | 70 W street lighting | 120 W street lighting | 250 W street lighting | 400 W street lighting |
| Typical power consumption under 700-900mA (can be regulated from 10 - 100 %) | 24 - 31 W | 48 - 62 W | 98 - 126 W | 170 - 234 W |
| Typical LED luminous flux (700 - 900 mA) (at a temperature of 5000 K, CRI 85) | 3840-4960 lm | 7680-9920 lm | 15680-20160 lm | 27200-37440 lm |
| Typical light luminous flux (700 - 900 mA) - clear - diffusive - optics | 3418 - 4415 lm 3110 - 4018 lm 3187 - 4117 lm | 6836 - 8830 lm 6220 - 8036 lm 6374 - 8234 lm | 13956 - 17942 lm 12700 - 16330 lm 13014 - 16733 lm | 24208 - 33322 lm 22032 - 30326 lm 22576 - 31075 lm |
| Total weight (without sController) | 6,3 kg 5,8 kg | 9,3 kg 8,6 kg | 13,4 kg 12,1 kg | 17 kg 15,6 kg |
| Rozměry (délka x šířka x výška) | 850 x 120 x 160 mm | 930 x 180 x 160 mm | 1480 x 180 x 160 mm | 1740 x 220 x 160 mm |
| Recommended Mounting Height | 4‒10 m | 4‒12 m | 6‒14 m | 8‒14 m |
| LED Chip Brand |  (Japanese) | |||
| Brackets for Lighting Pylons | Ø 45‒60 mm | |||
| Colour Rendering Index | CRI 85 - 92 (by selection) | |||
| Degree of protecion provided by the covering | IP50, IP65 (by selection) | |||
| Vandal Resistance Rating | IK10 | |||
| Voltage range | 195‒240 VAC | |||
| Cos φ | > 0,94 | > 0,94 | > 0,92 | > 0,90 |
| Operating temperature (Ta) | ‒30 to +50 °C | |||
| Control options |  1-10V sDimmer | |||
| Warranty at Ta up to 55 ˚C | light - 5 years (including warranty at maximum luminosity decrease to 70% of the original value) L70B20 power source - 5 years | |||
| LED degradation (luminosity decrease to 70% of the original value) | 193 000 hours (calculated by the LM-80 (10 k), at Ta 55°C) 299 000 hours (calculated by the LM-80 (10 k), at Ta 25°C | |||
| Glow wire | 650 °C - 5 sec. | |||
| Without ultraviolet and infrared radiation | ✔ | |||
| Without dangerous substances | ✔ | |||
| CE and ENEC certification | ✔ | |||
| Alternate white light temperature | 2700 K, 4000 K, 5000 K, 5600 K | |||
| Material | The body of the sLamp is made of 1.3 mm sheet metal and 3mm and 5mm profiles
from ČSN 11373 structural steel. Anti-corrosion and surface coating is ensured by fired anti-corrosion epoxy powder resin with a high RIPOL PRIMER ZINC C290 zinc content and heat-cured polyester powder paint RIPOL PEA BIANCO with high resistance to sunlight and temperature and climate differences. The customer can specify the colour of the body of the sLamp. The default colour is white RAL 9010. | |||
To be added.
12 hours daily operation, 0.11 EUR/kWh, 40 pieces of sLamp 2/3W 135
originally 40 pieces of 250W discharge tubes
return on investment: 2.4 years
annual savings: 5.270 EUR
12 hours daily operation, 0.18 EUR/kWh, 20 pieces of sLamp 3/3W 135
originally 20 pieces of 400W sodium discharge tubes
return on investment: 2.7 years
annual savings: 5.540 EUR
Czech producer of industrial LED lighting
Leave your contact, we'll call you:
