Quiet operation, immediate onset of performance and natural colours are among the uncompromising properties of the innovative successor of recessed fluorescent lamps.
sPanel has eliminated all the negative properties of “economical” fluorescent lamps, especially the slow start-up of the light and distorted colours.
sPanel is designed for maximum efficiency. It is currently a ceiling lighting fixture with the lowest total costs of lighting.
Protect your eyes and give them plenty of soft, natural, and pleasant light which will shine from the sPanel.
Czech product
developed and produced in Czech Republic
Simple installation
into the existing lighting fixture
Long lifespan
usually 193 000 hours
Extremely low consumption
up to 60% less than a standard bulb
Wide operation temperature range
(Ta) -30 to +55 °C
Return and multiplication of investment
during the warranty period
7 year warranty
for luminosity decrease
Control options
DALI, 1-10V, sDimmer
Angle of radiation 180°
optimal angle of radiation
Nanolight
0% efficiency increase. gentle, homogenous light
Saves eyesight
does not blink
Outdoor and indoor use
Compatability
sTube is designed for industry 4.0 systems
We recommend the sPanel for all areas that require pure light and mainly economical operation. If you aren’t certain that the sPanel is suitable for your operations, call us. We will be happy to hear from you.
At Snaggi we are ready to answer any questions you may have. Call us if you aren't sure about the properties of the sTube, or if you have any questions that haven't been answered. We will be happy to send a representative free of charge who will patiently offer you the best solution for your project. We will be happy to hear from you. Call us at 511 112 763 or 774 453 116. Show all contacts
Replaces ceiling luminary with four fluorescent tubes.
Replaces ceiling luminary with two fluorescent tubes.
Snaggi sPanel
A fluorescent ceiling light
Colour rendering index Ra is the fidelity evaluation of color perception, caused by light from any light source, compared to color perception created by the sun. The value of Ra can be from 0 to 100. Value Ra=0 means, that we can't distinguish colors in this lighting. On the other side value Ra=100 means, that we are using light source, which enables natural color reproduction.
Comparsion of Snaggi LED sPanel and fluorescent ceiling light. (Average L70 Extrapolation)
Test report LM-80 according to the methodology TM-21 / lifetime certification and degradation rate
Snaggi has been used unique light reflective nano foil in luminaries to reach even diffusion and softening of originally too hard LED light. Total reflectivity of the foil 99%, diffusing reflection 96%, mirror-reflection 3%.
| Označení | sPanel 1/55 with one LED tube | sPanel 2/55 with two LED tubes | |
|---|---|---|---|
| Replaces | Ceiling luminary 60x60cm with two fluorescent tubes | Ceiling luminary 60x60cm with four fluorescent tubes | |
| Typical power consumption under 700-900mA (can be regulated from 10 - 100 %) | 24 - 31 W | 48 - 62 W | |
| Typical LED luminous flux (700 - 900 mA) (at a temperature of 5000 K, CRI 85) | 3840 - 4960 lm | 7680 - 9920 lm | |
| Total weight | 5,7 kg | 6,4 kg | |
| Dimensions (length x width x height) | 60 x 60 x 10 cm | ||
| Number and type of assembled LED tubes | 1 pc of sTube 55 | 2 pcs of sTube 55 | |
| LED Chip Brand |  (Japanese) | ||
| Colour Rendering Index | CRI 82 - 92 (by selection) | ||
| Degree of protecion provided by the covering | IP 50, IP 65 (by selection) | ||
| Voltage range | 195‒240 VAC, 47‒57 Hz | ||
| Cos φ | > 0,94 | > 0,94 | |
| Operating temperature (Ta) | from ‒30 to +50 °C | ||
| Control options |  1-10V  | ||
| Warranty at Ta up to 55 ˚C | light - 7 years (including warranty at maximum luminosity decrease to 70% of the original value) L70B20 power source - 5 years | ||
| LED degradation (luminosity decrease to 70% of the original value) | 193 000 hours (calculated by the LM-80 (10 k), at Ta 55°C) 299 000 hours (calculated by the LM-80 (10 k), at Ta 25°C | ||
| Glow wire | 650 °C - 5 sec. | ||
| Without ultraviolet and infrared radiation | ✔ | ||
| Without dangerous substances | ✔ | ||
| CE and ENEC certification | ✔ | ||
| Alternate white light temperature | 2700 K, 4000 K, 5000 K, 5600 K | ||
| Material | Cover: PC (Polycarbonate) Heat Sink: Aluminium Extrusion The body is made of 1 mm sheet metal. Anti-corrosion and surface coating is ensured by fired anti-corrosion epoxy powder resin with a high RIPOL PRIMER ZINC C290 zinc content and heatcured polyester powder paint RIPOL PEA BIANCO with high resistance to sunlight and temperature and climate differences. The customer can specify the colour of the body of the sLamp. The default colour is white RAL 9010. | ||
24 hours daily operation, 0.11 EUR/kWh, 60 pieces of sPanel
Originally 60pcs 120W ceiling lights with 240pcs of fluorescent tubes T8 59cm
Return on investment: 2.5 years
Annual savings: 5.700 EUR
Czech producer of industrial LED lighting
Leave your contact, we'll call you:
